Violectric
Desktop Headphone Amplifier and Preamp With 256-Step Relay Volume Control
Item ID: HPA-V550PRO
Price: $4,974.00

Description

The HPA V550 PRO deserves the PRO in the name thanks to its 256-stage relay. This allows for much finer tuning. With its incomparable technology, the HPA V550 PRO offers one of the most powerful headphone amplifiers on the market. Simply brilliant: The function of the HPA V550 PRO is limited to purely analogue values, namely the headphone playback and the preamplifier function. The latest developments of the multiple test winners from Violectric and Niimbus have been implemented in the headphone amplifier. The preamp functionality has also been taken to a new level in the V550 Pro. Every function can be controlled via the remote control so that you can concentrate on listening pleasure. The HPA V550 PRO corresponds to the test winner DHA V590 - but without a D/A converter. Overview: - Lowest noise - due to a very small internal gain. As a result, the inherent noise of the amplifiers is inaudible. - High output voltage - due to 50 volt internal operating voltage. Therefore ideally suited for high-impedance headphones . - High output power - through powerful amplifiers that can deliver far more power than even the most demanding headphone can need. Therefore ideally suited for headphones with low impedances and also magnetostatics. - High damping factor - due to the lowest output impedance. Therefore ideally suited to control even the most difficult headphones without influencing them with a guarantee for an uncompromising frequency response. - Remote Control - Control the HPA V550 PRO remotely with its beautifully designed, one-piece remote control. Infrared gives you access to the motorized volume control, mute, input selection, resampling settings, headphone and line-out control.
  • 256 finely tuned volume levels.
  • Remote control for volume, mute, input selection, resampling, output selection.
  • Motorized volume controls.
  • balance control.
  • 3 analogue stereo inputs: 2 x unbalanced via RCA, 1 x balanced via XLR.
  • +/- 18 dB pre-gain for optimal adjustment of the HPA V550 Pro to the source and headphones.
  • 4 powerful amplifiers, 6400 mW Pmax into 50 ohms, 21 V RMS into 600 ohms.
  • Monitoring of the headphone outputs for DC voltage and overload.
  • Headphone path and line-out path can be switched separately.
  • Headphone outputs: 2x unbalanced with 6.3 mm jack, 1 balanced with 4-pin XLR.
  • Line Out: 1x unbalanced via RCA, 1x balanced via XLR.
  • Adaptation of the line-out signal to the following devices in the range +/- 18 dB.
  • 2 toroidal transformers, > 35,000 uF filter capacity.